My generac generator wont start,making a clicking noise and battery is fully charged
When the system trys to start it makes a clicking sound near the voltage regulator and the batter is fully charged it will click like 3 times then times out,kind of sounds like a relay or something any advice is welcome
Electrical Supplies - Generac
Answers & Comments
Have somone hold the start button while you measure the voltage across the battery. If it is less than 11 volts, then the battery is bad.
Measure the voltage at the Power terminal of the starter. When the switch is set to manual you should read aprox 12 volts at the starter. If not the starter contactor will require replacement. If 12 volts is measured the starter will require replacement