My hotpoint wd71 infobubble wont display any information- the display screen is completely blank any ideas on how to solve this? have tried switching machine off for a while but that hasnt helped
Washing Machines - Hotpoint - Ultima WD72 Front Load Washer/Dryer
Answers & Comments
Hi,
As you have already Unplugged the Unit for Few Minutes, say 30 minutes and still did not Solve the Problem. This is More often due to Faulty Control Board / Display Board. I am sorry, this is an expensive Repair. Everything on the LCD's are controlled by Control Board. The Principle here is same as applied on other electrical Appliances like Refrigerator.
This needs an engineer to visit the site and Fix this. The other Option could be You could Pull out the Control Board, Clean the Ribbon and Connectors and then see, if that could Fix the problem.
One of the Top Experts Mention one advise - Unplug washer and remove lid from there you will see the pressure switch. remove the thin hose and blow down it . check it for any holes. blow up pressure switch to see if it clicks.
If it does not Click, change Pressure Switch and more often it would solve the problem. Unless the same as i described above.
Let me know,if needed further assistance.
Hope i helped you.
Thanks for using ' Fixya ' and have a nice day!!