924 Fuser Error - Open circuit detected in thermistor circuit. The thermistor provides feedback on the temperature of the fuser roller and when it fails, the fuser normally does not heat up.
924 Fuser Error - Open circuit detected in thermistor circuit. The thermistor provides feedback on the temperature of the fuser roller and when it fails, the fuser normally does not heat up.
Answers & Comments
Here is a link to the complete repair procedure for the Infoprint 1422:
ftp://ftp.lexmark.com/depot/IBM/Info_1422_Depot_Repair_rev053106.pdf
Please go through this procedure, & if the problem is not fixed after all, you will need to replace the fuser unit.
Hello :
Check for manual here : http://safemanuals.com/zearchres_3224.php
good luck .
rate if useful please !
924
Fuser Error - Open circuit detected in thermistor
circuit.
The thermistor provides feedback on the
temperature of
the fuser roller and when it fails, the fuser
normally
does not heat up.