My indesit WIB101 is jumping, noisily on a spin, the drum belt loos fine but the seal inside the fron door looks all stretched and loose, do I need a new rubbe seal? Please answer quickly I cant afford a new one at this time of ytear o calout charges. I am quite handy tho even if anyone knows where I can find a repair manual? please?Ambers
Possibly the drum spring/s are unhooked in the top of the washer. or the suspensions are loose or worn at the bottom. This would cause the seal to twist out of shape. Make sure the washer is level as well, as this can cause it to jump about. you should not need to replace the seal unless it is split or has a hole/s in it. Hope this helps you.
Answers & Comments
Possibly the drum spring/s are unhooked in the top of the washer. or the suspensions are loose or worn at the bottom.
This would cause the seal to twist out of shape.
Make sure the washer is level as well, as this can cause it to jump about.
you should not need to replace the seal unless it is split or has a hole/s in it.
Hope this helps you.