My Janome Finesse 234 overlocker started to stop "looping" I cleaned, oiled & re threaded. It would start of fine but then the cotton on the needle would break or the loopers will stop stitching
Two things make sure your threading it in the right order. your upper looper first then your lower looper then your needles. If your doing that then change your needles and if your using cheap thread on an overlock it just wont sew right. You need to use a good quality thread on overlocks. Hope that helps
Answers & Comments
Two things make sure your threading it in the right order. your upper looper first then your lower looper then your needles. If your doing that then change your needles and if your using cheap thread on an overlock it just wont sew right. You need to use a good quality thread on overlocks. Hope that helps