Take a picture of your keyboard!! UnPlugg It!!! then use a small screwdriver and carefully pop off the keys, all of them.. let them soak in warm soapy water. while those are soaking, take some rubbing alcohol and q-tips and clean the rest of the board. towel dry and finish cleaning the keys. once dry use the picture and carefully start snaping the keys back into place. just take your time and all will go well. the first key removed should be an unused one.preferable at an edge. if something does go wrong it will happen the first attempt. if that goes well.. game on. if not so well.. just use rubbing alcohol and qtips on the whole thing while it is unplugged
Answers & Comments
Take a picture of your keyboard!! UnPlugg It!!! then use a small screwdriver and carefully pop off the keys, all of them.. let them soak in warm soapy water. while those are soaking, take some rubbing alcohol and q-tips and clean the rest of the board. towel dry and finish cleaning the keys. once dry use the picture and carefully start snaping the keys back into place. just take your time and all will go well. the first key removed should be an unused one.preferable at an edge. if something does go wrong it will happen the first attempt. if that goes well.. game on. if not so well.. just use rubbing alcohol and qtips on the whole thing while it is unplugged
Hello!
You can use a butterknife or flathead screwdriver. Just remember where the keys go back!
Good luck!