My mac is not recognizing my disk from my hard drive
This is what my mac is saying when I turn my hard drive on. Its says it doesn't recognize the disk. I went to verify in utilities and this is what it says. I don't want to loose my data!!!
Verifying volume “disk1s10”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Invalid node structure
The volume EZQ 120GB needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
Verifying volume “disk1s10”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Invalid node structure
The volume EZQ 120GB needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
Computers & Internet - EZQuest - Cobra - Cobra Plus (B12660) 120 GB Hard Drive
Answers & Comments
Open Disk Utility (as I'm sure you already have) and select the main partition of the problematic disk on the left side, which should be titled disk1s10. In the First Aid tab, click the "Repair Disk" button on the bottom right hand corner of the window. *Note: If this is the current boot disk, you will have to boot off of the Mac OSX Install Disk by inserting it and holding the "C" key while it is turning on. Select your language and choose Utilities --> Disk Utility from the menu on the top of the screen, then following the above instructions.