Most likely caused from dust under the DVD Deck. This requires that you open your console and blow the dust out ( DO NOT USE A VACUUM Tiny parts can be sucked up that will render it completely useless). After you have done this and put it back together again clean the laser as dust will have collected on it from when you blow out the dust. If you do all this and it is still doing the same thing it just could be a case of the poor old PS2 is wearing out.
Answers & Comments
Most likely caused from dust under the DVD Deck. This requires that you open your console and blow the dust out ( DO NOT USE A VACUUM Tiny parts can be sucked up that will render it completely useless). After you have done this and put it back together again clean the laser as dust will have collected on it from when you blow out the dust. If you do all this and it is still doing the same thing it just could be a case of the poor old PS2 is wearing out.