My Sewing Machine Keeps Jumping it's Timing
I have been looking around for a way to reset the timing on my sewing machine and I came across a response from you. Can you help?? So far my only solution has been the local repair shop. The Model is actually a EURO-PRO Shark Model 9110. I could not find the exact match below. Thanks.
Sewing Machines - Euro-Pro - 9105 Computerized Sewing Machine
Answers & Comments
Needle hook timing is set when the needle in the full down position has the bobbing carrier hook approaching the needle
AS the needle starts to rise the hook is at or just about at the eye of the needle
The adjustment is on the needle cam lever at the end of the machine and on most , there is a clamp around the shaft that is loosened of , the clamp tapped up or down to achieve the correct setting and re-clamped