MY TREADMILL STOPS JUST A MINUTE AFTER STARTING
FEW SECONDS AFTER STARTING THE DISPLAY FLASHES FOR ABOUT 5 SECONDS AND THE MACHINE STOPS COMPLETELY. ''SILICON WARTUNG'' IS DISPLAYED ON THE SCREEN.
WHEN THERE IS NO LOAD ON T HE MACHINE OR WHEN THE INCLINE IS MORE THAN 6% , THE MACHINE RUNS.
IT IS A ''KETTLER'' PRODUCT.
Exercise & Fitness - Kettler
Answers & Comments
Try Lubricating the belt with silicone spray.
Probably the resistence from the belt scraping over the ground board is too high, forcing the machine to switch off in order to prevent damage.