My turbochef tornado gives an error messag of
My turbochef tornado gives an error message of "F1 Blower" and won't continue to warm up. I keep resetting it and it will finally come on. I have just been keeping it running. Any suggestions?
Ovens - TurboChef - TORNADO Electric Oven
Answers & Comments
Could be the speed control PCB, or the motor, You need to test the impedence of the motor. You may have to replace both the motor and the PCB.
This is simple to fix but usually costly sorry to say.
F1 blower means the motor is not running when commanded.
first check the motor and verify if it spins freely - if the motor does not spin freeely remove the obstruction or replace the blower part# NGC-1025
just to clarify its the big blower behind the cook chamber not the little fan in the electrical compartment.