My unit is 220v single phase ----the wiring in the wall is one black, red, white and a ground wire ----what is the proper connection to the outlet
Heating & Cooling - Fedders - A3X05F2A Air Conditioner
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
The black is a 110 "leg" the red is a 110 "leg" the green is ground and the white is neutral. Not sure of what type receptacle you have but the black and red are
the hots and the white is connected to the neutral and the green is connected to the
green screw or terminal or wire that may be attached to the box itself.
The receptacle should be marked "Hot" or ACTIF on the hot terminals or identified
by reddish colored or gold screws. The neutral should be a silver screw. Make sure
power is off at the panel and check with a meter or tester before proceeding.
If you have any doubts, please contact a licensed electrician to prevent damage.