Something is probably loose either inside or in a connection somewhere. Make sure the plug is FIRMLY inserted in the back of the machine. Look inside and make sure that the plate is inserted correctly (in both top and bottom "tracks"). Make sure the metal contact "fingers" are pressing firmly against both sides of the plate. Make sure there are no wires that have pulled loose or corroded out. Also, make sure the machine is not plugged into an outlet which is on a line with a heavy appliance or furnace that draws a lot of power. If none of this helps, contact the company (now called Vollara) at 800-989-2299. You can use 16618 as your dealer referral number if you're no longer in contact with the original dealer.
Answers & Comments
Something is probably loose either inside or in a connection somewhere. Make sure the plug is FIRMLY inserted in the back of the machine. Look inside and make sure that the plate is inserted correctly (in both top and bottom "tracks"). Make sure the metal contact "fingers" are pressing firmly against both sides of the plate. Make sure there are no wires that have pulled loose or corroded out. Also, make sure the machine is not plugged into an outlet which is on a line with a heavy appliance or furnace that draws a lot of power. If none of this helps, contact the company (now called Vollara) at 800-989-2299. You can use 16618 as your dealer referral number if you're no longer in contact with the original dealer.