My vacuum toilet won't flush. The bowl is full of water, but pushing the plunger doesn't have any impact on the bowl. I can hear the vacuum, and when I open the back, I can see the plunger depress and then slowly relax, but nothing else happens
Home
Answers & Comments
What is the make and model number of this toilet?
sorry I need specific information so i can try and look a diagram of the workings, without it can't help also to order parts which i am sure you will need you will need to know the model and make..
we have no pictures how WOULD we without any model reliable information from you ? CATCH 22 HUH?
Hi.
Vacuum toilets often do not have model number printed on them.
Try to understand if the vacuum pump is working.
If the vacuum pump is not working, check the following:
a. Check input power, circuit breaker and fuse.
b. Tighten or reconnect wires at vacuum pump and tank, vacuum generator, or vacuum holding tank.
c. Be sure wires at vacuum switch are connected to “B” terminals.
d. Check vacuum switch. Short across “B” terminals with jumper wire.
e. Replace motor.
f. Empty the holding tank.
If the vacuum pump is working, check the vent plug is not closed or obstructed, and replace the vent filter.
Here how the toilet works:
Here manuals for several vacuum toilets:
VacuFlush toilet owner's manual
EcoVac 140 series Vacuum Toilet Manual
343026 VHT-10-03.p65
Permanent RV Toilet Owner's Manual Operation Installation
600345075 VacuFlush 5000 series manual
Please do not forget to leave feedback.
Thanks.
Ginko.
Vac toilets all work in the same way.
Do not get confused by experts asking for model number.
Please let us know how your problem goes. Do not forget to leave feedback at the end.
Regards.
Ginko.
What model toilet are we talking about here?
Thanks!