1.Wipers? Relay problem.Change it and it'll wirk fine,it only works on hi cuz the when u turn the switch on high it takes the 12v power directly to motor.and 1 n 2(and if u have 3) do through relay.Wipers Relay 2.Heater motor.If Manual switch,problem on motor adapter.Locate the motor on the pass side underneath the dash close to the pass door.u might have to take off the bottom part of dash and pull carpet a but.Locate the plug/harness that plugs on the motor.Now the problem is on the adapter where the plug goes.It adapts the volts from the switch.1 n 2 (n if u have 3) work through the adapter.and high it send a 12v power directly.Change that adapter thingy in the motor and you should be fine. 3. If digital switch problem on ac unified meter.replace it
Answers & Comments
1.Wipers? Relay problem.Change it and it'll wirk fine,it only works on hi cuz the when u turn the switch on high it takes the 12v power directly to motor.and 1 n 2(and if u have 3) do through relay.Wipers Relay
2.Heater motor.If Manual switch,problem on motor adapter.Locate the motor on the pass side underneath the dash close to the pass door.u might have to take off the bottom part of dash and pull carpet a but.Locate the plug/harness that plugs on the motor.Now the problem is on the adapter where the plug goes.It adapts the volts from the switch.1 n 2 (n if u have 3) work through the adapter.and high it send a 12v power directly.Change that adapter thingy in the motor and you should be fine.
3. If digital switch problem on ac unified meter.replace it