My X10 Pro pool lighting controller worked for a while, then quit
My X10 was working great, after I had a bad pool light replaced (apparently this was causing the problem). Then, all of a sudden, it quit working completely. Sometimes I can turn on the pool lights at the panel, and then turn them off with my controller, but then nothing. I can plug in the controller into the GFI outlet inside my panel, and it works fine. Can anyone offer a suggestion?
Televison & Video - X-10 - X10 Smart Repeater Remote Controls
Answers & Comments
Most likely the pool motor or other devices are making the powerline noisy. I suggest either getting an x 10 tester or unpluggin hosehold devices until you find teh source of the noise.
Stephen Lerouge
Home Automation Inc,
Southwest territory Manager