These are the check / repair items listed for a 2 flash trouble code: 1. Gas supply off or gas supply pressure too low. 2. Flame sense rod contaminated or loose wire. 3. Gas valve switch is off or wires are not connected. 4. Broken or cracked porcelain on flame probe or spark ignitor.
These are the check / repair items listed for a 2 flash trouble code: 1. Gas supply off or gas supply
pressure too low.
2. Flame sense rod contaminated
or loose wire.
3. Gas valve switch is off or wires
are not connected.
4. Broken or cracked porcelain on
flame probe or spark ignitor.
If none of the "fixes" above work, relace the circuit board. If none of the "fixes" above work, relace the circuit board.
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
These are the check / repair items listed for a 2 flash trouble code: 1. Gas supply off or gas supply
pressure too low.
2. Flame sense rod contaminated
or loose wire.
3. Gas valve switch is off or wires
are not connected.
4. Broken or cracked porcelain on
flame probe or spark ignitor.
If none of the "fixes" above work, relace the circuit board.