Hi, I can fix this. First, on the bottom of the legs, there is a thumb latch, press that all the way down into the hold it is in. do this on all three legs. Then once that is done turn the whole thing to the left, it should fold in two, on the sides, there are three latchs that go into the hole next to the small legs, those latches secure it in place.....
To unfold, simply press on the holding latches, and pull up.
On ours you you push the buttons in and push it over but you can look up the instruction manuel at https://plweb.evenflo.com/replacement_parts.aspx you do need to have the manufactor number and date and they should be On the inside of one of the legs when you adjust it to the highest level or on the underside of the plastic seat ring. hope this helps and if it does leave me a good ranking
Answers & Comments
Hi, I can fix this.
First, on the bottom of the legs, there is a thumb latch, press that all the way down into the hold it is in. do this on all three legs.
Then once that is done turn the whole thing to the left, it should fold in two, on the sides, there are three latchs that go into the hole next to the small legs, those latches secure it in place.....
To unfold, simply press on the holding latches, and pull up.
Good Luck.
Gordon & Shirley
On ours you you push the buttons in and push it over but you can look up the instruction manuel at https://plweb.evenflo.com/replacement_parts.aspx you do need to have the manufactor number and date and they should be On the inside of one of the legs when you adjust it to the highest level or on the underside of the plastic seat ring. hope this helps and if it does leave me a good ranking