Normally most of the pen drive are plug and play means the hardware is recognised automatically by windows. Try the following steps below: >start >setting >control panel >administrative tools >computer management >in left column click disk management >then you can perform format according to your choice. ok try this and let me know Any other help, you are most welcome Regards Uttam
Answers & Comments
Normally most of the pen drive are plug and play means the hardware is recognised automatically by windows.
Try the following steps below:
>start
>setting
>control panel
>administrative tools
>computer management
>in left column click disk management
>then you can perform format according to your choice.
ok try this and let me know
Any other help, you are most welcome
Regards
Uttam
ok
Try the technical support of the manufacturer.
they can help you with that issue
here is the link: