To Access The Brake Light Youll Need To Remove Carper Or Panel Opposite Of The Light. I Am Referring To The Inside Of The Vehicle Referred To As The Trunk Or Rear Storage. Once You Remove The Panel Or Carpet you Will Have Full Access To The Lights. Find The Light That Is Burnt Out By Turning On All The Lights From The Inside You Can See The Light In The Harness Not Working. Next Grasp The Rear Of The Holder Twist And Pull. A New Light Can Be Found At Any Auto Parts Store.
Open rear hatch to access tail light. May be a rubber seal that has to be removed. Remove the screws holding light in. With flathead screwdriver, pry off light. Then turn and pull out light. To remove bulb, you have to push and turn.
Answers & Comments
To Access The Brake Light Youll Need To Remove Carper Or Panel Opposite Of The Light. I Am Referring To The Inside Of The Vehicle Referred To As The Trunk Or Rear Storage. Once You Remove The Panel Or Carpet you Will Have Full Access To The Lights. Find The Light That Is Burnt Out By Turning On All The Lights From The Inside You Can See The Light In The Harness Not Working.
Next Grasp The Rear Of The Holder Twist And Pull.
A New Light Can Be Found At Any Auto Parts Store.
Open rear hatch to access tail light. May be a rubber seal that has to be removed. Remove the screws holding light in. With flathead screwdriver, pry off light. Then turn and pull out light. To remove bulb, you have to push and turn.