Avaya Partner System Time Program #103 Considerations: Enter the time in 24 hour notation. In this scheme, the hours of the day are 0000 (12 midnight) to 2459 (11:59). Since each time must have four digits, use leading zeros when necessary. The time appears on system phones as A.M. or P.M., not 24 hour notation. Programming: To change system time: Press Feature, 00, System Program, System Program, #,103 at extension 10 or 11. Enter a new time in 24 hour notation. For example, to set time to 2:15 P.M., press 1415. This time will appear on the phone as 2:15 P. Select next procedure or exit programming mode by pressing Feature, 00 or lifting and hanging up the handset.
You probably don't have a "System Program" showing on your phone since that's what's on the template used in programing that fits on the buttons. Instead of pushing "System Program" you push the left Intercom button twice.You probably don't have a "System Program" showing on your phone since that's what's on the template used in programing that fits on the buttons. Instead of pushing "System Program" you push the left Intercom button twice.
Press "Feature" "0" "0" the left intercom twice. This will display the time. it will either display in miltary time (24:00) or AM PM. If you do this before noon, you won't have to worry either way. after putting the time in, hit "Feature" "0" "0" again to get out. If you get it wrong just start over.
Oops... after **** the feature 00 (on either Ext 10 or 11) put in #103, then change the time.Oops... after **** the feature 00 (on either Ext 10 or 11) put in #103, then change the time.
Answers & Comments
Avaya Partner System Time Program #103 Considerations: Enter the time in 24 hour notation. In this scheme, the hours of the day are 0000 (12 midnight) to 2459 (11:59). Since each time must have four digits, use leading zeros when necessary. The time appears on system phones as A.M. or P.M., not 24 hour notation.
Programming: To change system time: Press Feature, 00, System Program, System Program, #,103 at extension 10 or 11. Enter a new time in 24 hour notation. For example, to set time to 2:15 P.M., press 1415. This time will appear on the phone as 2:15 P. Select next procedure or exit programming mode by pressing Feature, 00 or lifting and hanging up the handset.
You probably don't have a "System Program" showing on your phone since that's what's on the template used in programing that fits on the buttons. Instead of pushing "System Program" you push the left Intercom button twice.
Press "Feature" "0" "0" the left intercom twice. This will display the time. it will either display in miltary time (24:00) or AM PM. If you do this before noon, you won't have to worry either way. after putting the time in, hit "Feature" "0" "0"
again to get out. If you get it wrong just start over.
Oops... after **** the feature 00 (on either Ext 10 or 11) put in #103, then change the time.