Darn, OK. First, check with a multimeter and find which pins give you around 200 Ohms. Next, touch one tip to the chassis and find the GROUN pin on the cable (lowest resistance) The GROUND goes to pin 1 on XLR The other two go to pins 2 and 3. Sorry I can't tell you which goes to which (phase), but you can check putting it next to another one and seeing if they sum or cancel. If cancel, invert them two... Peace-
Answers & Comments
Darn, OK.
First, check with a multimeter and find which pins give you around 200 Ohms.
Next, touch one tip to the chassis and find the GROUN pin on the cable (lowest resistance)
The GROUND goes to pin 1 on XLR
The other two go to pins 2 and 3.
Sorry I can't tell you which goes to which (phase), but you can check
putting it next to another one and seeing if they sum or cancel.
If cancel, invert them two...
Peace-