Don't know model but they are all much the same.
there will be a pcb behind the control buttons and you will find some of the track burnt out causedd by the bulb blowing. do a soldered wire link across the burnt section of the track

David, I have exactly the same problem. My unit is a Zephyr Napoli zna-m90s. I tried to find where the fuse is but no success. I saw three light colored plastic containers next to blower. One for electric connection, one for control circuit and the third one with a big metal cylinder which i am not sure what it is used for. But no fuse. I checked that power is coming to control circuit. Did I miss anything?

Had the same problem with a Zephyr Napoli. My fix: there was a blown miniature glass fuse on the control board inside the control box next to the fans. You need to do some disassembly to get to it but it's easy enough to replace. The bigger problem: The blown fuse is the result of a short circuit in the leads going to the G4 bulbs. They burn hot and destroy the insulation on the leads going to the ceramic socket. A penny saved by using cheap cabling. You will need to insert some heat resistant insulation between the leads and the metal bulb brackets or else it will repeat - or cause a fire inside the unit.

Lights and fan do not work yet power is still going to the back of the unit of the Zephyr Typhoon Hood AK 2100. Light burnt out, the unit shorted and now nothing works, neither lights or fans. I cannot see any fuse box or breakers that are burned out or tripped. Everything else in the kitchen works. I opened the hood but nothing appears amiss inside. But the buttons do not even light up...What do you recommend?