How do I configure my NIC with a static IP for use with a SpeedTouch Home?If you are using an Alcatel SpeedTouch Home (without a router), a PPPoE client such as NTS, WinPoet, or RASPPPoE, and are experiencing stalls and freezes while surfing or connected, it may be that your NIC is not configured correctly. You must set a Static IP on your NIC. If you have it incorrectly set for "Obtain IP automatically" it will be looking for a DHCP server that does not exist. During the time the NIC is searching for the DHCP server you will experience stalls and freezes. An incorrect NIC settings will also cause the PC to take a longer time to boot up.
This FAQ has two sections: Section 1 - NIC Properties for Windows95/98/ME Section 2 - NIC Properties for Windows2000/XP
Section 1 - NIC Properties for Windows95/98/ME Step 1 Click on Start ->Settings ->Control Panel ->Network
Step 2 Once at the Network Window scroll down and look for the first entry in the box marked Internet Protocol (TCP/IP) that is associated with your hardware ethernet card (ignore dialup, AOL, and VPN type bindings). Select the correct Internet Protocol (TCP/IP) entry and click PROPERTIES. network key for ot 800 - image3679.gif"/uploads/images/image3679.gif" alt="image3679.gif" /> Acnetwork key for ot 800 - bred.gifeen shots may vary
Step 3 Select the IP ADDRESS tab. Select Use the following IP address and enter 10.0.0.1 and 255.255.255.0 into IP address and subnet mask fields respenetwork key for ot 800 - image3693.gifo not click on OK yet.
Actual screen shots may vary
Step 4 Select the GATEWAYnetwork key for ot 800 - image3695.gif10.0.0.138 into New Gateway field network key for ot 800 - bred.gifk on Add. Click OK.
Step 5 Close all windows and restart the PC.
Section 2 - NIC Properties for Winows2000/XP
Click on START -> SETTINGS -> CONTROL PANEL -> NETWORK CONNECTIONS. Right click on Local Area Connection and select Propertiesnetwork key for ot 800 - image8060.gifStepnetwork key for ot 800 - bred.gifr>On the General tab highlight Internet Protocol (TCP/IP) and click PROPERTIES.
Actual screen shots may vary
Snetwork key for ot 800 - image8061.gifSelect the GENERAL tab. Select Use the following IP address10.0.0.1, 255.255.255.0, and 10.0.0.138 into IP address, Subnet mask, and Default gateway fields respectively. Click OK.
Answers & Comments
How do I configure my NIC with a static IP for use with a SpeedTouch Home?If you are using an Alcatel SpeedTouch Home (without a router), a PPPoE client such as NTS, WinPoet, or RASPPPoE, and are experiencing stalls and freezes while surfing or connected, it may be that your NIC is not configured correctly. You must set a Static IP on your NIC. If you have it incorrectly set for "Obtain IP automatically" it will be looking for a DHCP server that does not exist. During the time the NIC is searching for the DHCP server you will experience stalls and freezes. An incorrect NIC settings will also cause the PC to take a longer time to boot up.
This FAQ has two sections:
Section 1 - NIC Properties for Windows95/98/ME
Section 2 - NIC Properties for Windows2000/XP
Section 1 - NIC Properties for Windows95/98/ME
Step 1
Click on Start ->Settings ->Control Panel ->Network
Step 2
Once at the Network Window scroll down and look for the first entry in the box marked Internet Protocol (TCP/IP) that is associated with your hardware ethernet card (ignore dialup, AOL, and VPN type bindings). Select the correct Internet Protocol (TCP/IP) entry and click PROPERTIES.
network key for ot 800 - image3679.gif"/uploads/images/image3679.gif" alt="image3679.gif" />
Acnetwork key for ot 800 - bred.gifeen shots may vary
Step 3
Select the IP ADDRESS tab. Select Use the following IP address and enter 10.0.0.1 and 255.255.255.0 into IP address and subnet mask fields respenetwork key for ot 800 - image3693.gifo not click on OK yet.
Actual screen shots may vary
Step 4
Select the GATEWAYnetwork key for ot 800 - image3695.gif10.0.0.138 into New Gateway field network key for ot 800 - bred.gifk on Add. Click OK.
Step 5
Close all windows and restart the PC.
Section 2 - NIC Properties for Winows2000/XP
Click on START -> SETTINGS -> CONTROL PANEL -> NETWORK CONNECTIONS. Right click on Local Area Connection and select Propertiesnetwork key for ot 800 - image8060.gifStepnetwork key for ot 800 - bred.gifr>On the General tab highlight Internet Protocol (TCP/IP) and click PROPERTIES.
Actual screen shots may vary
Snetwork key for ot 800 - image8061.gifSelect the GENERAL tab. Select Use the following IP address10.0.0.1, 255.255.255.0, and 10.0.0.138 into IP address, Subnet mask, and Default gateway fields respectively. Click OK.
Actual screen shots may vary
Step 4
Close all windows and restart the PC.