New builded pc wont install, system is schut down
DFI NF680ILT board.
EVGA 1GB Screancard in top port 16X, working fine
2 DVD burner
1 80 GB sata disk
INTRL CORE DUO 300
450 WATT powersupply
4 X OCZ REAPER PC2 6400, 4-3-3
We have tryed combinatione in orange slot with ram, we have tryed in the yellov, but the pc very seldomne start to install, and when it goes to install Windows Vista, den it shut down the system, whot are we doing wrong with this board??
I hope you are able to solve this problem for us, becourse we would like to get this high end mashine to run.
Regards
Henrik from Denmark
EVGA 1GB Screancard in top port 16X, working fine
2 DVD burner
1 80 GB sata disk
INTRL CORE DUO 300
450 WATT powersupply
4 X OCZ REAPER PC2 6400, 4-3-3
We have tryed combinatione in orange slot with ram, we have tryed in the yellov, but the pc very seldomne start to install, and when it goes to install Windows Vista, den it shut down the system, whot are we doing wrong with this board??
I hope you are able to solve this problem for us, becourse we would like to get this high end mashine to run.
Regards
Henrik from Denmark
Computers & Internet - Ultra Products - Ultra Defender Intel Gaming Desktop PC - Intel Core 2 Duo...
Answers & Comments
Hi Henrick,
Are you using the correct spec R.A.M.? or is it faulty.
I relate to your problem and all looks fine apart from memory.
Don't rule out the possibility of a Mother Board fault? I have had similar& severe grief in the past, tried all routes and replaced loads only to find sata circuit connection dry joint/ un soldered. (So New Motherboard under warranty)
Good Luck!
Paul 'W'
Onyer~EDson(:0) {#><U.K.