New SFS & Thermistor - still having issues
Hello,
I originally had the "E05" error and the SFS light on control board on. I replace SFS but still have same problem. The unit will run for 30-60 sec then kick off with E05. Strange thing is if I unplug then plug the electrical for the SFS & Thermistor the unit will usually work until I shut if off, however the temperature reading is wrong. With the heater running it may start at 77 but then slowly go down to 60.
Any ideas? Does it sound like the control board may be bad? Thanks for any help..
I originally had the "E05" error and the SFS light on control board on. I replace SFS but still have same problem. The unit will run for 30-60 sec then kick off with E05. Strange thing is if I unplug then plug the electrical for the SFS & Thermistor the unit will usually work until I shut if off, however the temperature reading is wrong. With the heater running it may start at 77 but then slowly go down to 60.
Any ideas? Does it sound like the control board may be bad? Thanks for any help..
Pool & Spa - Sta Rite - Sta-Rite Max-E-Therm High Effiency - Propane Heater -...
Answers & Comments
Hi
This problem is due to fuel supply and/or Thermal Regulator. You'll need to check whether the fuel supply is on and thermal regulator is firmly connected, also check for correct orifices.
Please see this link for details (Page #29)---
Sta-Rite Max-E-Therm Heater
Please do accept the solution if the issue is resolved or else revert for further assistance.
Thanks
Rylee
Hi, Well it certainly sound like the control board is faulty my friend which is why you are facing this problem.If you get it reapires or replaced it will fix the problem.
Thanks! mannu_rakesh