Clear the CMOS by getting the Jumper11 or remove the Lithium Battery CR2032. Usually this happen when some part on the MB are hang-up, no beep, no display. Or Try to change or test another Processor on it. I encounter like this before and that's what i do until its working. Good luck! If i am helpful please rate me.
Answers & Comments
Clear the CMOS by getting the Jumper11 or remove the Lithium Battery CR2032.
Usually this happen when some part on the MB are hang-up, no beep, no display.
Or Try to change or test another Processor on it.
I encounter like this before and that's what i do until its working.
Good luck!
If i am helpful please rate me.
Yboyandrei