No detection in wireless condition
After configuration of the Camera attached to the Router I could get everything running well (local, via Internet, ...). After disconnect the Ethernet cable the Camera couldn't been detected anymore via wireless.
What's wrong?!
Computers & Internet - D-Link - DCS - DCS-6620G Network Camera
Answers & Comments
Turn off the camera, remove the ethernet cable and switch camera back on. you can also check on the wireless router status to see if the camera is detected. If not, check the wireless settings again. pay attention to any client access control and if need be, turn off firewall momentarily to try if that is the blocking the access.
- Make sure you enter the correct wireless settings on the camera accordingly to the wireless settings of your wireless router.