Check all fuses on the amp first. If the fuses are good then make sure the remote wire is hooked up. If you dont wanna run the remote wire from the amp to the stereo then all you need to do is run a wire from the remote on the amp to the power on the amp. if the remote is not hooked up then you will get NO SOUND
Answers & Comments
Check all fuses on the amp first. If the fuses are good then make sure the remote wire is hooked up. If you dont wanna run the remote wire from the amp to the stereo then all you need to do is run a wire from the remote on the amp to the power on the amp. if the remote is not hooked up then you will get NO SOUND