No power o front panel no led radout no 110 or 220 or weld out put
Had power when I started it but no amp control tried reset all breakers no read out on front panel for amp or fuel
Electrical Supplies - Miller - Trailblazer 302 AC/DC Welder Generator - Kohler Gasoline...
Answers & Comments
With a trailblazer, it could be numerous things. Either circuit board or both. With this machine, unfortunately, it is best to take it to a shop. These machines are notorious for bad power boards (inside the metal cover) and the front boards as well. Look for burnt traces and lit LED's.
Check switch continuity inside the control panel.Check all the switches.