Hi Thanks for using FixYa. From what you have described it seems to be an issue with the power supply board which is the board where all the power cords plugs into. If that is fine then check the main board, a component on any of these boards might have gone bad and needs to be replaced. If it was working fine earlier then don’t think that the issue is with the LCD Panel and/or inverter board. To start with you’ll need to open the back of the unit and check/test the components and replace the one that has gone bad. Please do accept the solution if the issue is resolved or post a comment for further assistance. Thanks Rylee
Answers & Comments
Hi
Thanks for using FixYa. From what you have described it seems to be an issue with the power supply board which is the board where all the power cords plugs into. If that is fine then check the main board, a component on any of these boards might have gone bad and needs to be replaced. If it was working fine earlier then don’t think that the issue is with the LCD Panel and/or inverter board. To start with you’ll need to open the back of the unit and check/test the components and replace the one that has gone bad. Please do accept the solution if the issue is resolved or post a comment for further assistance.
Thanks
Rylee
It was the on/off switch that was defective you should allways try the easyist way frist thanks for the help
Eric
Good to know that the issue has been resolved.