No Power to Windsor Sensor XP12
My company's windsor sensor xp12 has no power getting to it and I have changed the bag, cleaned all filters and beater brush to no avail. Can you help me? The vacuum is barely a year old. Could it be a fuse, and if so, where would I find it?
Vacuums - Windsor - SR12 Sensor Bagged Upright Vacuum
Answers & Comments
The Windsor Sensor vacs all have a removable handle.
The handle is inserted into a "socket" which has contacts to complete the electrical circuit.
The handle is held in place by a gray plastic lever.
If the lever is not pressed down completely, the handle is able to slide within the socket during regular use.
If the handle slides out far enough, the electrical connection within will be disconnected and the vac will have no power.
Simply lift the lever, pull up to remove the handle, and re-insert the handle fully, then press down firmly on the lever to lock the handle securely in place.
This is the first step to solve your problem and hopefully this is all that need to be done.
If this does not work, please repost here and I will help you all I can.
Note: I am a big fan of the Windsor Sensor vacs and find them to be easy to work on and a great vac all around!
Replacee the cord or only the head cord.
Http://www.homeprovacuum.com has free technical support for all Windsor commercial equipment available on their live chat, or by calling 1-866-888-0128.