I am not sure if you have a plumbed model or the one with the tank, however, I will give advice for both. If machine is plumbed, make sure water is turned on then remove the top panel on the boiler is a reset switch (it is on the side of some models), its a red push in switch. If using a tank, fill then press reset and turn machine on.
Answers & Comments
I am not sure if you have a plumbed model or the one with the tank, however, I will give advice for both.
If machine is plumbed, make sure water is turned on then remove the top panel on the boiler is a reset switch (it is on the side of some models), its a red push in switch.
If using a tank, fill then press reset and turn machine on.