This is almost always due to a bad speaker connection in the speaker output terminals on the back of the receiver unit, or the speaker input terminals on the back of the speakers. Check your wire connections at these points and fix as necessary. If the plastic wire insulation is pushed inside the terminals, it will prevent the wire from making contact in the terminal.
I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514
Answers & Comments
This is almost always due to a bad speaker connection in the speaker output terminals on the back of the receiver unit, or the speaker input terminals on the back of the speakers. Check your wire connections at these points and fix as necessary. If the plastic wire insulation is pushed inside the terminals, it will prevent the wire from making contact in the terminal.
I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514