No sound to remote speakers in dining & deck areas
I have a rotel rb-03 power amp. there are 2 speaker connections each with + and - connections. What incoming wires go where please? I have a
red,black , green and white incoming wires.
Presently ther is no sound going to speakers in the dining area and the outside deck - was working ok previously.
thank you
Ron
Audio Players & Recorders - Rotel - RMB-1095 Power Amplifier
Answers & Comments
Incoming from WHAT? Ampifiers accept inputs via RCA connections and send amplified audio to the speakers via the + and - OUTPUT terminals.
I'm guessing your colored wires are from your speakers and that there is a piece of this puzzle we do not see - how the speakers on the deck and in the dining area are wired.
You say, "was working ok previously"... previous to WHAT? Something changed.
You can probably troubleshoot and resolve this yourself.
Set the amp to a medium output level.
If the wires are simply leading to either or both pairs of speakers you could select any two of them and connect them to one side of the amp. Only a pair going to the same speaker(s) will produce sound. Once you identify one pair, the other pair probably goes to the other speakers. Connect them to the other channel output.
The last piece would be to establish correct phasing between the speakers. Bass response will suffer if they're not IN-phase. Play something with substantial bass. Listen closely, then reverse the wires on one side only. Test again. If it IMPROVES you have it right. If it losses bass, put the wires back the way they were.