Check the carbon and the spring in side the distributor cup 2nd change the high tention lead from the coil to distributor 3th ignition on remuve the 2 wires from the coil check the curen 12 volts as + conect to the coil and 4th check the black wire is your - with test light then conect to the coil good luck.
Answers & Comments
Check the carbon and the spring in side the distributor cup 2nd change the high tention lead from the coil to distributor 3th ignition on remuve the 2 wires from the coil check the curen 12 volts as + conect to the coil and 4th check the black wire is your - with test light then conect to the coil good luck.
Check the coil wire from coil to distributor cap.