Noisy washer removed back Took the belt off the drum and spun no noise Put belt back on motor and it made a noise so it identifies the bearings in the motor is the problem. Can these be repaired
Can be the bushes if they at the end these can be changed not like the bearing in your other question. check the length of the bushes there should be around 8mm on them if they below 6mm they need replacing.
Answers & Comments
Can be the bushes if they at the end these can be changed not like the bearing in your other question. check the length of the bushes there should be around 8mm on them if they below 6mm they need replacing.