Not Printing correctly
I recently had to rebuild my computer and am now attempting to reload the print drivers. The printer seems to be communicating fairly well with the PC. The problem now, everytime I send a job to the printer it gets this message across the printer screen, SG; 0033,2357,0888,03. Depending on the size of the job it will print but the top spool that will hold the spent Ribbon will turn correctly causing the job to look blotched. It almost appears to me that the printer is not hot enough. Please Help!
Office Equipment & Supplies - Toshiba TEC - B-572 Printer
Answers & Comments
This may me due to various factors.
- The parallel port is only unidirectionnal. You should use ATcompatible for this port instead of ECP on the computer.
- The driver sends data in topix compression not understood by your printer.
- there is problem on your parallel port
This may me due to various factors.
- The parallel port is only unidirectionnal. You should use ATcompatible for this port instead of ECP on the computer.
- The driver sends style="display:none;">This may me due to various factors.
- The parallel port is only unidirectionnal. You should use ATcompatible for this port instead of ECP on the computer.
- The driver sends data in topix compression not understood by your printer.
- there is problem on your parallel port
this is due to syntax error.
- port configuration not correct.
- graphics style="display:none;">this is due to syntax error.
- port configuration not correct.
- graphics data not correct for the firmware version.