First, be sure that the water collection bucket is installed properly in the holder. Also, check the top of the bucket for a float valve when you remove it, to reinstall it.
The float valve is in the top of the bucket and may be stuck in the UP position. Therefore, the unit will not start. If you find this (not all units have them), jiggle the float valve arm to get it to return to the DOWN position.
When you reinstall the bucket, be sure that it fits "squarely" into the bucket holder from top to bottom. The bottom of the bucket should not tilt down at all.
NOTE: Before attempting any of the above, turn the unit OFF & Unplug it.
I hope this helps you to troubleshoot and solve the problem. Thanks for choosing FixYa.
Answers & Comments
There is no fuse or reset button on your unit.
First, be sure that the water collection bucket is installed properly in the holder. Also, check the top of the bucket for a float valve when you remove it, to reinstall it.
The float valve is in the top of the bucket and may be stuck in the UP position. Therefore, the unit will not start. If you find this (not all units have them), jiggle the float valve arm to get it to return to the DOWN position.
When you reinstall the bucket, be sure that it fits "squarely" into the bucket holder from top to bottom. The bottom of the bucket should not tilt down at all.
NOTE: Before attempting any of the above, turn the unit OFF & Unplug it.
I hope this helps you to troubleshoot and solve the problem. Thanks for choosing FixYa.