O to my PC running Windows 7 x64 via TI Firewire card? PC is not recognizing Projectmix
It worked fine on my last PC running Win7 with the same Firewire card, but now the Projectmix is not being recognized at all. I've tried different Firewire drivers, legacy etc. changed cables etc. It's just not having it. could it have something to do with different processors? Before I was using Intel, now AMD.
Music - M-Audio - ProjectMix I/O Control Surface/Interface
Answers & Comments
Did you change the IEEE 1394 Host Controller to a legacy driver or did you just add one? You have to change IEEE 1394 to the 1394 OHCI Compliant Host Controller, specifically.
Did "Firewire Enabler" get installed in the Start menu? If so, give it a try. Make sure to download the latest PMI/O update from M-Adio if you haven't already.
Also, the old computer might of had a different PCI card. I remember there being compatibility issues with PMI/O and Express cards. Check the card type. There might be a firmware, patch or an update to fix the issues.
If the card is incompatible, just switch out with the other (if you still have it).
If the issue still exists, try Klinke's MCU plugin. It should work if nothing else. Maybe check for ASIO Driver issues. Other than that, it would have to be hardware or bad cables.