Turn the ignition key to the OFF’ position with the odometer reading shown. Turn the ignition key to the ‘ON’ position while holding down the trip meter reset knob. Hold down knob for at least 5 seconds. The light goes off, and the display shows zero for 1 second and changes to the odometer reading. If the system fails to restart, the light will remain on or keep flashing.
Answers & Comments
This should work.
Turn the ignition key to the OFF’ position with the odometer reading shown. Turn the ignition key to the ‘ON’ position while holding down the trip meter reset knob. Hold down knob for at least 5 seconds. The light goes off, and the display shows zero for 1 second and changes to the odometer reading. If the system fails to restart, the light will remain on or keep flashing.
Good luck and thank you for using Fixya.