Oil leak in front in front behind bumber mitsubishi gt 2004. it seems its leaking from an orange it looks like a coffee cup in size that's screwd on.. Was never leaking until yesterday , after i put oil in Now i just drove my car and see oil on the snow thanks so much
When changing the oil it is important to wet the sealing o-ring with oil before screwing it on. Tighten the filter 3/4 turns after the seal touches the engine. Most oil filters have clear installation instructions on the box or actual filter. Look carefully , if your oil filter is leaking, Take off the leaking filter and replace it with a new one. Top up the engine oil as needed.
Answers & Comments
When changing the oil it is important to wet the sealing o-ring with oil before screwing it on. Tighten the filter 3/4 turns after the seal touches the engine. Most oil filters have clear installation instructions on the box or actual filter. Look carefully , if your oil filter is leaking, Take off the leaking filter and replace it with a new one. Top up the engine oil as needed.