Ok i jus buy a ac chek presure manifold, i wanna recharge mi ac carcompresor but the manual donat said how conect tha house in the r134a can, just said how to chek the presur,, can some one help me with this???? thanks
Welding Tools - Mountain - R134A Brass Manifold Gauge Set with Couplers
To connect the hose to the can, it should have a locking ring with a valve. Some connectors screw on clockwise, and others snap on and clamp downward with a locking lever. To open the can, just turn the T valve down clockwise. To release the freon into the hose, turn the valve to the left. Never remove can from the valve assembly, until the can is empty. If you have no clamp and valve for the freon, just a hose, you can buy one at your local auto parts store
Answers & Comments
To connect the hose to the can, it should have a locking ring with a valve. Some connectors screw on clockwise, and others snap on and clamp downward with a locking lever. To open the can, just turn the T valve down clockwise. To release the freon into the hose, turn the valve to the left. Never remove can from the valve assembly, until the can is empty. If you have no clamp and valve for the freon, just a hose, you can buy one at your local auto parts store