Not worth buying a remote, you can use an rf converter or what i did was use an old DirecTV remote as i have several. on DTV remote, set selector switch located at top of remote all the way to the right to tv. Then hold down the select and mute button at the same time until the green light blinks 2 times, then enter one of these codes until the power button turns on the tv. Codes are as follows 10236 10463 11463 10179 11911 11929. Also verify that the tv input button does activate the aux channel. I knew these old remotes would come in handy some day.
thank you so much after 5 days you did it. used the code 10463 with my dir tv remote thank you thank youthank you so much after 5 days you did it. used the code 10463 with my dir tv remote thank you thank you
Did you figure this out? i did it by accident once so i know it is possible without a remote but i went back to tv mode and now i can't get back into aux mode. let me know if you have a solution.
Answers & Comments
Not worth buying a remote, you can use an rf converter or what i did was use an old DirecTV remote as i have several. on DTV remote, set selector switch located at top of remote all the way to the right to tv. Then hold down the select and mute button at the same time until the green light blinks 2 times, then enter one of these codes until the power button turns on the tv. Codes are as follows
10236 10463 11463 10179 11911
11929. Also verify that the tv input button does activate the aux channel. I knew these old remotes would come in handy some day.
thank you so much after 5 days you did it. used the code 10463 with my dir tv remote thank you thank you
Did you figure this out? i did it by accident once so i know it is possible without a remote but i went back to tv mode and now i can't get back into aux mode. let me know if you have a solution.
thanks.
I lobe you
Robert Jones is a God among us puny little humans. We must bow down to the 2nd coming of Jesus himself