Oven controls oven was preheated and it is now reading F2 or F3 on display window. Cannot get oven to stay on...Please help. I have a Tappan gas range 30 series
Kitchen Ranges - Tappan - TGF320 Gas Kitchen Range
Those failure codes usually mean the oven sensor is out of range or has an open circuit. you can replace the sensor for about 50-75 bucks and that will allow the oven to heat properly again. you wont need to do any reseting or clearing of the code, just fix the problem and that code will go away.
Answers & Comments
Those failure codes usually mean the oven sensor is out of range or has an open circuit.
you can replace the sensor for about 50-75 bucks and that will allow the oven to heat properly again.
you wont need to do any reseting or clearing of the code, just fix the problem and that code will go away.