Paper Jams I have a Risograph RA 4200. The paper feeds in, but keeps on getting stuck at the top of the drum inside the machine or leaves the machine and just dangles on the edge.I've wiped down the drum and rollers inside with a soft cloth. Any suggestions?
I think you should make sure that you have a border at the top of the original so that the machine can peel the copies off the drum. or you can press the image shift button to -10 to give you this border
Clean with a soft cloth and alcool the Paper Sensors, specialy the paper sensor (one under the drum), and also the clean the stripper pad, Pickup roller, Scraper roller, Gide roller, Timing roller in the firts paper feed drive mechanism If you need the manual instructions post a mail at: [email protected]
Answers & Comments
I think you should make sure that you have a border at the top of the original so that the machine can peel the copies off the drum. or you can press the image shift button to -10 to give you this border
Clean with a soft cloth and alcool the Paper Sensors, specialy the paper sensor (one under the drum), and also the clean the stripper pad, Pickup roller, Scraper roller, Gide roller, Timing roller in the firts paper feed drive mechanism
If you need the manual instructions post a mail at: [email protected]