Pause id pressed, the above lights go out and Lid Locked lamp comes on. When Power button is pushed, alarm sound comes on and it goes back to the 3rd & 4th LEDs glowing and alarm sounds again sounded. Is there a reset button to reset the electronics? Of course, machine can not be used and solinoids obviously have not opened as no water has entered machines bowl
Washing Machines - Fisher and Paykel - GWL11 Top Load Washer
The third and fourth lights from the left indicate a failed motor controller (error code 48) If this is the correct fault code you will have to replace the motor controller. However before that is done all the electrical components which can effect the controller must be checked as well...Best to call a tech...Good luck Nomess
Answers & Comments
The third and fourth lights from the left indicate a failed motor controller (error code 48) If this is the correct fault code you will have to replace the motor controller. However before that is done all the electrical components which can effect the controller must be checked as well...Best to call a tech...Good luck Nomess