Pc powers on but no display(light on board and fan is working)
Pc powers (light on board and fan is working) on but monitor goes to power save. Display card issue? Monitor is working fine and correct input is used.
Computers & Internet - Shuttle - (sn41g2b (black)) PC Desktop
Answers & Comments
Could be a loose Display Card... pretty rare that would happen if the System has been working fine. An event would have to occur to knock it out.
The PC should boot to the BIOS with everything unplugged in the System. Try to re-seat the Display Card first if not, unplug the Hard Drive to see if that is causing the issue. If you have an On-Board Video... pull the Display Card to see if you get a Boot.
Pull Modem as well...
If it were Memory you would get a beep. Wouldn't hurt to clean and re-seat Mem as well while your in there. Dust does cause errors because of poor connections. :)