Pc will not boot
Get one long beep every 3 seconds or so, but system just hangs with no display or hd activity - beep code says dram not detected, but 1G ddr2 is installed. It worked originally, but I installed a stick of ddr ram by mistake and now even with the correct ddr2 it still will not detect
Computers & Internet - Biostar - K8M800 Micro AM2 Motherboard
Answers & Comments
Make sure the ram is seated properly and in the slots correctly. If you are using more than one chip, use only one to start and then add any others yoiu may have. I think you will find a ram slot is craked or the chip is inserted backwards. You really cannot damage a M/B by adding DDR instead of DDR2. It really just about the bus path and bus speed. Double check our work.