Pentax MZ-60 New Tele-Macro converter Sigma 2x-1:1 connected to Sigma 28-300 lens. Av flashing in display screen, unable to do anything. The converter works fine with the same lens coupled to Pentax istD
The camera does not operate when a lens with the following conditions attached:
1. When a lens, which does not have autofocus function is attached. 2. When an F or FA lens is attached with the aperture ring set other than the A position. 3. F or FA 85mm f/2.8 Soft lens and FA28mm f/2.8 Soft lens cannot be used because these lenses do not have the A position on the lens aperture ring.
Answers & Comments
The camera does not operate when a lens with the following conditions attached:
1. When a lens, which does not have autofocus function is attached.
2. When an F or FA lens is attached with the aperture ring set other than the A position.
3. F or FA 85mm f/2.8 Soft lens and FA28mm f/2.8 Soft lens cannot be used because these lenses do not have the A position on the lens aperture ring.
Please click on this link and download the user manual and refer page number 36:
http://safemanuals.com/user-guide-instructions-owner-manual/PENTAX/MZ-60%20%40%40%20ZX-60-_E
Good luck...
Can you give me the model of the converter?
Thanks,
Lee
Have you tried cleaning the lens contacts with soft cloth?
ifnot do that.
is there no problem with out the lens in there?